Note: All measurements stated have been calculated by measuring from the boat floor to the base of the seat.
Plug-In (removable) :
Have been designed to slide into a boats existing plug-in base which is mounted into the floor.
Available in 4 different heights
The length of the plug-in pedestal that recesses into the floor has been calculated into the measurements. When ordering simply measure from the boat floor to the base of the seat.
4 different pedestal heights are available.
-
360mm (14”)
-
400mm (15 ¾”)
-
450mm (17 ¾”)
-
550mm (21 ½”)
To install simply remove your old 60mm pedestal from the seat and plug-in base and insert your Wave Master® pedestal.
Please ensure that you order the correct height that you require as the pedestal pole CAN NOT BE CUT down to size. If you cut the pedestal pole it WILL NOT fit into the plug-in base.
All Plug-In Wave Master® Pedestals are designed to be used with a 60 mm seat base. Should you wish to use a 73mm (standard) or 75mm (e.g. Reelax) seat base then a seat adaptor may be purchased separately.
2 different sizes are available.
-
73mm (2 7/8”)
-
75mm
To install the adaptor sleeve simply slide the adaptor sleeve over the top of the Wave Master® Unit and secure with the supplied grub screw and allen key.
Fixed (non-removable) :
Have been designed to bolt down onto the boat floor.
Available in 3 different heights
3 different pedestal heights are available.
-
410mm (16”)
-
440mm (17 1/4 ”)
-
500mm (19 ½”)
When ordering simply measure from the boat floor to the base of the seat.
To install simply unbolt the existing base and 73mm pedestal and re-screw in the Wave Master® pedestal.
All fixed Wave Master® Pedestals come with an adaptor sleeve fixed, by a small grub screw, onto the top of the Wave Master® unit. This adaptor sleeve enables the Wave Master® unit to fit into your existing 73mm seat base. If you wish to use a 60mm seat base simply remove the small grub screw with an appropriate sized allen key. Should you wish to use a 75mm (e.g. Reelax) seat base then a seat adaptor may be purchased separately.
Wave Master® Seat Support will not be held accountable for the incorrect fitting and/or incorrect use of the supplied product or any damages that may be resultant from these actions. The Wave Master® Seat Support DOES NOT eliminate any of the risks associated with boating. Safe boating practices should be adhered to at ALL times.
