Installation/Safety Guide

Plug-In (removable):

  • Have been designed to slide into a boats existing plug-in base which is mounted into the floor.
  • If you wish to purchase a base they can be purchased separately - please see safety information on this page.
  • Available in 6 different heights
  • The length of the plug-in pedestal that recesses into the floor has been calculated into the measurements. When ordering simply measure from the boat floor to the base of the seat and choose the height that you require.
  • 6 different pedestal heights are available - 360mm (14”), 400mm (15 ¾”), 440mm (17 ¼), 450mm (17 ¾”), 490mm (19 ¼), 550mm (21 ½”).
  • To install simply remove your old 60mm pedestal and seat from plug-in base and firmly insert the Wave Master® Suspension Pedestal ensuring that it has been fully inserted into the base. Remove the seat and seat adaptor from the old pedestal by loosening the knob/handle on the seat adaptor. Push the seat and seat adaptor down firmly onto the top of the Wave Master Suspension Pedestal and re-tighten with the knob/handle on the seat adaptor. Please ensure that the floor of the boat is sturdy and that all of the bolts on the plug-in base are fastened tightly before inserting the Wave Master Suspension Pedestal.
  • Please ensure that you order the correct height that you require as the pedestal pole can not be cut down to size. If you cut the pedestal pole it will not fit into the plug-in base.
  • All Plug-In Wave Master® Suspension Pedestals are designed to be used with a 60 mm seat base. Should you wish to use a 73mm (standard) seat base then a seat adaptor may be purchased separately.
  • To install the adaptor sleeve simply slide the adaptor sleeve over the top of the Wave Master® Unit and secure firmly with the supplied grub screw and allen key prior to installing your seat and seat adaptor.
  • Trac Lock Swivel seat bases may be purchased separately in either locking or non locking.
Have been designed to slide into a boats existing plug-in base which is mounted into the floor.4 different pedestal heights are available.To install simply remove your old 60mm pedestal from the seat and plug-in base and insert your Wave Master® Suspension Pedestal.Please ensure that you order the correct height that you require as the pedestal pole CAN NOT BE CUT down to size.  If you cut the pedestal pole it WILL NOT fit into the plug-in base.
All Plug-In Wave Master® Suspension Pedestals are designed to be used with a 60 mm seat base.  Should you wish to use a 73mm (standard) seat base then a seat adaptor may be purchased separately.To install the adaptor sleeve simply slide the adaptor sleeve over the top of the Wave Master® Unit and secure with the supplied grub screw and allen key.When ordering simply measure from the boat floor to the base of the seat and choose the height that you require.
Order Now

Note: All measurements stated have been calculated by measuring from the boat floor to the base of the seat.

Fixed (non-removable):

  • Have been designed to bolt down onto the boat floor - please see safety information on this page.
  • Now available in 6 different heights – The Cadia - 320mm (13"), 410mm (16”), 440mm (17 ¼”), 450mm (17 ¾"), 480mm (19"), 500mm (19 ½”)
  • When ordering simply measure from the boat floor to the base of the seat and choose the height that you require.
  • To install remove the seat and seat adaptor from the old pedestal by loosening the knob/handle on the seat adaptor. Unbolt the screws on the existing pedestal base and re-screw in the Wave Master® Suspension Pedestal ensuring that it is fastened securely. Make sure that the bolts are a firm fit into an existing hole pattern. New holes may need to be drilled to ensure a secure fit – please see bolt pattern on this website.
  • Trac Lock Swivel seat bases may be purchased separately in either locking or non locking.
When ordering simply measure from the boat floor to the base of the seat and choose the height that you require.To install simply unbolt the existing base and 73mm pedestal and re-screw in the Wave Master® Suspension pedestal.Latest model added to our range – “The Cadia”Available in 3 different heights
Order Now

Note: All measurements stated have been calculated by measuring from the boat floor to the base of the seat.

Important Safety Information

  • When replacing your existing pedestal with ANY Wave Master Suspension Pedestal ensure that the surface that you are mounting/inserting it to is sturdy and free from any defects i.e rotting wooden floor. Failure to do so could result in serious injury or death.
  • When bolting down the Fixed Wave Master Suspension Pedestal it is important that the bolts are a firm fit into the existing holes. Failure to do so could result in serious injury or death. New holes may need to be drilled to ensure a secure fit. Before the drilling of any holes the installer should be aware of the location of any and all fuel storage tanks, water storage tanks and electrical power supplies. Wave Master Suspension Pedestal and Muddie’s Marine Pty Ltd will not be held accountable for any damage caused whist drilling of any holes as this is beyond our control. If in doubt please have a marine outlet install the product.
  • When inserting a Plug-In Wave Master Suspension Pedestal into a plug-in base ensure that it has been fully inserted into the base and that the bolts are fastened tightly. Failure to do so could result in serious injury or death.
  • Do NOT loosen or remove ANY of the screws on the Wave Master unit. The screws are there to act as double guard to ensure that the top stays in place. When you undo or remove the screws you allow air from inside the Wave Master unit itself to escape and it will cease to work correctly. Tampering with the Wave Master unit will void the warranty.
  • Any advice or recommendations made by representatives of Wave Master Suspension Pedestals or Muddie’s Marine Pty Ltd is only that and all due care should be taken when completing the installation. The installation of any Wave Master Suspension Pedestal is the responsibility of the purchaser and/or the owner of the vessel.

Wave Master® Suspension Pedestal and Muddie’s Marine Pty Ltd will not be held accountable for the incorrect fitting and/or incorrect use of a supplied product or any damages that may be resultant from these actions. The Wave Master® Suspension Pedestal DOES NOT eliminate any of the risks associated with boating. Safe boating practices should be adhered to at ALL times. Please carefully read this safety and installation guide prior to installation and use. Failure to follow this guide may result in serious injury or death.